Easytrip RFID is owned by the Metro Pacific Tollways Corporation and is being exclusively used for the company’s expressways, which include CAVITEX, NLEX, NLEX Connector, SCTEX, CALAX, and CCLEX.

Using an Easytrip RFID lets you pass those aforementioned expressways with ease and speed. No need to scramble looking for cash to pay for the toll gate. Just proceed to the RFID lane, wait a second or two to detect your card, and pass the boom barrier as it opens.

The service is free and all you have to do is pay for the initial load amount. But what if you’re about to run out of credit? Here’s a guide on how you can reload your Easytrip RFID.

There are tons of way to do it, so let’s start.

Table of Contents

Easytrip-RFID-NoypiGeeks

Reload Easytrip RFID on physical merchants

As per the company, there are over 10,000 onsite reloading merchants across the Philippines. Some of these sites are near the actual expressways for your convenience.

Simply proceed to these sites and ask for the on-site representative for assistance.

e-Wallet and online services

How to reload Easytrip using GCash?

Step 1: Open your GCash app > Tap Pay Bills on the dashboard.

Step 2: Tap Transportation.

Step 3: Look for Easytrip RFID via the search bar on top.

Step 4: Key in the Easytrip RFID account number and amount. You can also enter the email address if you want to, where the receipt will be sent.

Step 5: Click Next, confirm all the details are correct and hit pay. There’s a Php12 transaction fee.

How to reload Easytrip RFID using PayMaya

Step 1: Open your PayMaya app.

Step 2: Tap Pay Bills and choose Easytrip RFID in the biller section.

Step 3: Key in your Easytrip RFID account number, load amount, and tap Pay.

How to reload Easytrip using Coins.ph

Step 1: Open your Coins.ph app and tap Cash Out.

Step 2: Scroll down and look for Easytrip RFID in the Tollway Credits section.

Step 3: Key in the amount, then the Easytrip RFID account number, then slide to pay. The transaction will cost Php12.

How to top-up Easytrip credit using GrabPay

Step 1: Open the Grab app > Tap More > Tap Bills > Tap Easytrip.

Step 2: Key in your account number and the amount to be reloaded.

Step 3: Tap Pay to complete the payment. You shall receive a confirmation that the transaction was successful. There’s going to be a Php12 service fee.

How to load Easytrip using ShopeePay

Step 1: Open the Shopee app > Tap Load and Bills > Tap Toll > Choose Easytrip RFID.

Step 2: Type your account details and load amount.

Step 3: Select the payment option. You shall receive a confirmation that the transaction is successful. There’s a Php12 convenience fee.

Online Services

How to reload Easytrip using Bayad Online

Step 1: Open your Bayad Online account.

Step 2: Proceed to the Bills Payment Section > TOLL > EASYTRIP RFID.

Step 3: Key in and review your details before checking out. There’s a Php12 transaction fee.

Top-up Easytrip RFID using Bayad Center

Step 1: Visit a Bayad Center branch within SM Malls.

Step 2: Fill out the Bayad Center Payment Slip by inputting your Easytrip account name and account number.

Step 3: Pay the reload amount. There’s a minimum Php500 reload fee with a Php12 transaction fee.

How to reload Easytrip using ExpressPay

Step 1: Go to your nearest Expresspay participating branch.

Step 2: Fill up the transaction form with your Easytrip account number, name, and reload amount.

Step 3: Present the form to the cashier to process the transaction with the payment. You shall receive a receipt as proof of the transaction There’s a Php12 service fee.

Reload EasyTrip using JUSTPAY.TO

Step 1: Visit the www.justpay.to/easytriprfid.

Step 2: Key in your account number and amount to be reloaded.

Step 3: Select the payment method. There’s going to be a Php15 + 3.5% convenience fee.

Mobile/Telecoms

How to load Easytrip using Smart and TNT

Simply Text EASY(Load amount)<SPACE>12-digit account number and send it to 3279. Example: EASY100 520001234567.

The load denominations are 100, 300, 500, and 1000. The load will be credited quickly and is free of charge.

Reload Easytrip RFID via Smart Padala

Step 1: Visit your nearest Smart Padala agent.

Step 2: Present your Easytrip RFID account number.

Step 3: Provide the payment to the agent. The load should be credited instantly with a Php12 transaction fee.

Related articles

cavitex-toll-fees-faqs-NoypiGeeks

Payment Centers and kiosks

How to top-up Easytrip credit via TouchPay

Step 1: Go to your nearest TouchPay machine.

Step 2: On the screen, type your 12-digit Easytrip RFID account number.

Step 3: The machine will show your remaining RFID balance. Select your mode of payment to continue the reloading process.

Step 4: Key in the load amount.

Step 5: Insert the money into the slot.

Step 6: Click pay to proceed and wait for the receipt to be printed. The minimum load amount is Php500 and there’s a Php10 transaction fee.

How to reload Easytrip RFID on 7-Eleven via CLIQQ kiosk

Step 1: Visit your nearest 7-Eleven store with a CLIQQ machine.

Step 2: Tap Bills payment, then tap Easytrip.

Step 3: Key in your 12-digit Easytrip account number, mobile number, and reload amount.

Step 4: Verify that all the information is correct and present the receipt to the cashier for the payment. There’ going to be a 1.25% transaction fee.

Load Easytrip via POSIBLE

Step 1: Proceed to any POSIBLE Outlet and ask the representative to assist you for the Easytrip RFID reloading.

Step 2: You’d be asked to input your Easytrip account number and the amount to be loaded.

Step 3: Once the reload is successful, the representative will take the payment and will then provide the official receipt. A Php12 transaction fee will be charged.

Reloading Easytrip using ECPay

Step 1: Proceed to an ECPay reloading partner or kiosk.

Step 2: On the screen, tap Bills Payment then tap Easytrip.

Step 3: Key in your 12-digit Easytrip RFID account number, mobile number, and the amount.

Step 4: Verify that all the details are correct. Wait for the receipt and pay at the cashier. There’s a Php10 transaction fee that will be deducted from the load amount. There’s also a minimum reload amount of Php500.

Easytrip load via The SM Store

Step 1: Go to any of the participating SM Stores (Department Store) near you and proceed to the Bills Payment or Business Services counter.

Step 2: Present your Easytrip RFID account number or Easytrip card to the cashier.

Step 3: Pay for the load amount. There’s a Php500 minimum reload amount and a Php10 service fee.

Easytrip RFID credit via the Robinson’s Malls

Step 1: Visit any participating mall branch.

Step 2: Proceed to the Bills Payment or Business Service counter.

Step 3: Present your Easytrip RFID card or the 12-digit account number. Then, pay the load amount. There’s a Php500 minimum amount with a Php12 transaction fee.

Reloading Easytrip RFID via Cebuana Lhuillier

Step 1: Visit your nearest Cebuana Lhuillier branch and fill out the Remittance / Payment Form (RPF) with your Easytrip account number and the amount you want to reload.

Step 2: Present the form to the cashier together with the payment.

Step 3: You shall receive an acknowledgment receipt as proof of transaction. There’s going to be a Php15 transaction fee and a minimum of Php2,000 per transaction.

Banks

How to reload Easytrip RFID using Maybank

Step 1: Open and log in to the Maybank2i PH app.

Step 2: Tap Pay > Choose Easytrip RFID.

Step 3: Key in your 12-digit Easytrip account number and subscriber’s name.

Step 4: Enter the amount and tap Proceed.

Step 5: Review the details and click confirm. You’d be charged a Php10 transaction fee.

Top-up Easytrip using UnionBank

Step 1: Open and log in to your UnionBank Online app.

Step 2: Tap Pay Bills > Choose Easytrip Service Corporation from the list of billers.

Step 3: Key in your Easytrip account number and the user’s name.

Step 4: Key in the amount and confirm the payment. There’s a Php500 minimum load amount.

Reloading Easytrip RFID using Metrobank

Step 1: Login your account.

Step 2: Got to Bills Payment and look for Easytrip Services Corporation in the biller section.

Step 3: Key in your Easytrip account number and reload amount.

How to get Easytrip credit using BDO

Step 1: Open your BDO online banking account by visiting https://online.bdo.com.ph.

Step 2: Click Enrollment > Company/Biller > Enroll > Easytrip Service Corporation.

Step 3: Choose the channels for enrollment: Online banking, Automated Teller Machine (ATM), and mobile banking.

Step 4: Fill out the enrollment details and click Submit.

Step 5: Once you’re now enrolled, proceed to Pay Bills and Reload > Bills Payment > Pay Bills. The load will be credited on the next banking day.

Top-up Easytrip RFID using UCPB

Step 1: Open and log in to your UCPB App.

Step 2: Select Pay Bills > Tap Services > Choose Easytrip.

Step 3: Key in your Easytrip RFID account number, subscriber’s name, and reloading amount. Click Done and confirm the payment. The load will be credited after 48 banking hours with a Php7 transaction fee.

Reloading Easytrip RFID using Robinson’s Bank online or over the counter

Robinsons Bank Digital

Step 1: Open your Robinsons Bank Digital account via the app or over the country.

Step 2: Tap on Payment > Make a New Payment > Transportation Biller > Easytrip RFID.

Step 3: Fill out the required details, then tap confirm. Review all your details and click pay. You should receive an SM or email confirmation that the transaction was successful.

Over the counter

Step 1: Go to your nearest Robinson’s Bank branch and fill up the bills payment slip with your Easytrip account name, payor’s name, Easytrip account number, and the amount to be loaded.

Step 2: Present the slip to the teller for processing and payment.

How to reload Easytrip via BPI

Step 1: Open and sign in to your BPI Mobile app and proceed to the Payments/Load section.

Step 2: Choose Load e-wallet and choose Easytrip.

Step 3: Key in the details and the load amount, then proceed with the payment.

Reloading Easytrip RFID credit using BancNet

Step 1: Login using your online bank’s username and password.

Step 2: Click Bills Payment > Tap Others > and choose Easytrip Services Corporation under the biller name.

Step 3: Key in your Easytrip account number and the reload amount. The load will be credited on the next banking day with a Php7 transaction fee deducted on the load amount.


Leave a comment

Your email address will not be published. Required fields are marked *